Cap System

CAP SYSTEM_____________

Euroholds show their constant desire to innovate and revolutionize the World of climbing holds. Working alongside the design studio, PSYCO ART HOLDS, we have developed a system to plug the centre/bolt hole of our holds, thereby achieving four objectives:

1.-  Avoid the use of this hole as a progression point for climbers. i.e make it impossible to use the bolt hole as a part of the hold.

2.- Avoid potential finger injuries arising from climbers using the bolt hole.

3.- We have also unified the length of screws to fix most of the holds, so a 50mm screw serves for 95% of all our holds, this is extremely useful when you're setting.

4.-  Most important of all: It allows us to meet European Standards UNE EN-12572: 3 (There shouldn’t  be holes between  8-25mm and deeper than 15mm).

The center hole of the cap allows the use of the allen wrench, making it unnecessary to remove and replace the cap every time you move the hold.
The center hole in our holds has a groove for setting the cap correctly.